产品参数:
XJR-T1160 Vertical Machining Center Technical Parameters | |||
Travel | X-axis Travel mm | 1100 | |
Y-axis Travel mm | 600 | ||
Z-axis Travel mm | 600 | ||
Distance from Spindle End Face to Worktable Surface mm | 120-720 | ||
Distance from Spindle Center to Column Guideway mm | 650 | ||
Worktable Specifications | Worktable Size mm | 1200*600 | |
Worktable T Slot—Number | 5 | ||
Size*Pitch mm | 18*100 | ||
Worktable Load Capacity Kg | 1000 | ||
Spindle Taper(Model/Sleeve Diameter mm) | BT40/150 | Note: Taiwan-made high-speed synchronous belt drive spindle , spindle speed up to 10000rpm , combined with the specially designed reinforced bed structure, especially suitable for high-strength, high-efficiency, high-quality surface finish special processing requirements. Spindle lubrication: imported high-grade grease lubrication, fully enclosed, maintenance-free. | |
Spindle Speed (RPM) | 0-8000 | ||
Recommended Motor Parameters (Main Motor/Kw, X, Y, Z Axis/Kw) | 11/15KW； X Axis/Y Axis/Z Axis @ Motor 4Kw； Note: Z Axis with brake. | ||
Ball Screw | X Axis Ball Screw Specification mm |
Φ40*12 | The three axes adopt Taiwanese precision pre-tensioned ball screws, hardened and heat-treated, precision ground, ensuring minimal thermal deformation and the best feed accuracy. |
Y Axis Ball Screw Specification mm | |||
Z Axis Ball Screw Specification mm | |||
| Connection (Drive) Method | X.Y.Z Axis Motor Connection Method | X, Y, Z Axis Motor Connection Method | |
| Spindle Connection Method | Spindle Connection Method | ||
Feed Rate G00,G01 (Rate) | G00 Rapid Feed mm/min Rapid federate | X Axis Rapid Feed m/min | 36(Theoretical Value) |
Y Axis Rapid Feed m/min | 36(Theoretical Value) | ||
Z Axis Rapid Feed m/min | 36(Theoretical Value) | ||
| G01 Cutting Feed mm/min Cut federate | X Axis Cutting Feed mm/min | 1-10000 | |
Y Axis Cutting Feed mm/min | 1-10000 | ||
Z Axis Cutting Feed mm/min | 1-10000 | ||
| Minimum Input Unit mm | Pulse Equivalent mm | 0.001 | Note: Machine Tool Accuracy Inspection Standard (High Standard, High Precision) |
| Machine Tool Accuracy mm | Repeatability mm | ±0.004 | |
| Positioning Accuracy mm | 0.01 | ||
| Tool Magazine (Optional) | Tool Change Method | Automatic Tool Changer (ATC) | Tool magazine can add large tool management as required. Specify a certain tool pocket as a large tool in the program. Then large tools entering the magazine will avoid the set large tool pocket to prevent collision accidents between large tools. |
Max. Tool Diameter mm | 80mm | ||
Max. Tool Length mm | 300mm | ||
Max. Tool Weight Kg | 8Kg | ||
Selection Method | Bidirectional Random | ||
Tool Exchange Method | Pneumatic | ||
Tool Change Time sec. (Tool to Tool) | 1.8 | ||
Tool Magazine Capacity T | 24T | ||
