产品参数:
|
Technical Specifications of XJR-T855 Vertical Machining Center |
|||
|
Travel |
X-axis Travel mm |
800 |
|
|
Y-axis Travel mm |
550 |
||
|
Z-axis Travel mm |
550 |
||
|
Distance from Spindle Nose to Table mm |
320-870(Extended 200) |
||
|
Distance from Spindle Center to Column Guide mm |
575 |
||
|
Table Specifications |
Table Size mm |
1000*550 |
|
|
Number of T-slots |
5 |
||
|
T-slot Size*Pitch mm |
18*90 |
||
|
Table Load Capacity Kg |
600 |
||
|
Spindle Taper (Model/Spindle Diameter mm) |
BT40/Φ150 |
Note: Taiwan-made high-speed synchronous toothed belt drive spindle, with spindle speed up to 10000rpm. Combined with an integrally reinforced specially designed bed structure, it is especially suitable for high-strength, high-efficiency machining with excellent surface finish. Spindle Lubrication: Imported high-grade grease lubrication, fully enclosed, maintenance-free. |
|
|
Spindle Speed (RPM) |
0-10000 |
||
|
Recommended Motor Parameters (Main Motor/Kw, X, Y, Z-axis/Kw) |
7.5/11KW; X-axis/Y-axis 1.8Kw Z-axis 3.0Kw. Note: Z-axis with brake. |
||
|
Ball Screws |
X-axis Ball Screw Spec mm |
Φ40*16 |
Three axes adopt Taiwan precision preloaded ball screws, hardened and precision ground for minimal thermal deformation and optimal feeding accuracy. |
|
Y-axis Ball Screw Spec mm |
|||
|
Z-axis Ball Screw Spec mm |
|||
| Coupling (Transmission) Method |
X.Y.Z Motor Coupling Method |
X, Y, Z Motor Coupling Method |
|
| Spindle Coupling Method | Spindle Coupling Method | ||
|
Feed Rate G00, G01 (Speed) |
G00 Rapid Feed mm/min |
X-axis Rapid Feed m/min |
48 (Theoretical) |
|
Y-axis Rapid Feed m/min |
48 (Theoretical) |
||
|
Z-axis Rapid Feed m/min |
48 (Theoretical) |
||
| G01 Cutting Feed mm/min |
X-axis Cutting Feed mm/min |
1-10000 |
|
|
Y-axis Cutting Feed mm/min |
1-10000 |
||
|
Z-axis Cutting Feed mm/min |
1-10000 |
||
| Minimum Input Unit mm |
Pulse Equivalent mm |
0.001 |
Note: Machine tool accuracy inspection standard (High standard, high precision) |
| Machine Accuracy mm |
Repeat Positioning Accuracy mm |
±0.004 |
|
| Positioning Accuracy mm | 0.01 | ||
| Tool Magazine (Optional) |
Tool Change Mode |
Robotic Arm |
Tool magazine can be configured with large tool management as required. A tool pot can be designated for large tools in the program, and subsequent large tools will avoid the set pot to prevent collision. |
|
Max Tool Diameter mm |
80mm |
||
|
Max Tool Length mm |
300mm |
||
|
Max Tool Weight Kg |
8Kg |
||
|
Selection Mode |
Bi-directional Arbitrary |
||
|
Tool Change Type |
Pneumatic |
||
|
Tool Change Time sec. (Tool-to-Tool) |
2.5 |
||
|
Tool Magazine Capacity T |
24T |
||
