产品参数:
| XJR-T855 Vertical Machining Center Technical Specifications | |||
| Travel | X-axis travel (mm) | 800 | |
| Y-axis travel (mm) | 550 | ||
| Z-axis travel (mm) | 550 | ||
| Spindle nose to table surface distance (mm) | 320-870 (with 200mm extension) | ||
| Spindle center to column guideway distance (mm) | 575 | ||
| Table Specifications | Table size (mm) | 1000*550 | |
| Table T-slot - quantity | 5 | ||
| Size*spacing (mm) | 18*90 | ||
| Table load capacity (Kg) | 600 | ||
| Spindle taper (type/sleeve diameter mm) | BT40/Φ150 | Note: Taiwan-made high-speed synchronous timing belt driven spindle with maximum speed up to 10000rpm. Combined with reinforced special bed structure, specially designed for high-intensity, high-efficiency machining with superior surface finish requirements. Spindle lubrication: Uses imported high-grade grease lubrication, fully enclosed, maintenance-free. | |
| Spindle speed (RPM) | 0-10000 | ||
| Recommended motor specifications (Main motor/Kw, X,Y,Z axis/Kw) | 7.5/11KW; X-axis/Y-axis 1.8 Z-axis 3.0Kw. Note: Z-axis with brake. | ||
| Ball Screw | X-axis ball screw specification (mm) | Φ40*16 | All three axes use Taiwan-made precision pre-tensioned ball screws, hardened and precision ground to minimize thermal deformation and ensure optimal feed accuracy. |
| Y-axis ball screw specification (mm) | |||
| Z-axis ball screw specification (mm) | |||
| Connection (Transmission) Method | X.Y.Z motor connection method | Direct coupling | |
| Spindle connection method | Timing belt drive | ||
| Feed Rate G00, G01 | G00 Rapid feed (mm/min) | X-axis rapid feed (m/min) | 48(theoretical) |
| Y-axis rapid feed (m/min) | 48(theoretical) | ||
| Z-axis rapid feed (m/min) | 48(theoretical) | ||
| G01 Cutting feed (mm/min) | X-axis cutting feed (mm/min) | 1-10000 | |
| Y-axis cutting feed (mm/min) | 1-10000 | ||
| Z-axis cutting feed (mm/min) | 1-10000 | ||
| Minimum input unit (mm) | Pulse equivalent (mm) | 0.001 | Note: Machine accuracy inspection standard (High standard, high precision) |
| Machine accuracy (mm) | Repeat positioning accuracy (mm) | ±0.004 | |
| Positioning accuracy (mm) | 0.01 | ||
| Tool Magazine (Optional) | Tool change method | Mechanical arm | The tool magazine can be equipped with large tool management. When a specific tool pocket is designated for large tools in the program, subsequent large tools will avoid the designated pockets to prevent collision between adjacent (large) tools. |
| Maximum tool diameter (mm) | 80mm | ||
| Maximum tool length (mm) | 300mm | ||
| Maximum tool weight (Kg) | 8Kg | ||
| Selection method | Bi-directional random | ||
| Tool exchange method | Pneumatic | ||
| Tool change time (sec., tool-to-tool) | 2.5 | ||
| Tool magazine capacity (T) | 24T | ||
