产品参数:
| Item | Model | XJR-DT52-450 |
| Machining Range | Max. Swing Diameter Over Bed | 500mm |
| Max. Machining Diameter for Disc Parts | 350mm | |
| Max. Turning Length | 450mm+45mm (with tool mounted on rear side of tool disc) | |
| Max. Milling Length | 450mm | |
| Min. Distance from Chuck Jaw to Tool Disc | -100mm | |
| Max. Distance from Chuck Jaw to Tool Disc | 450mm | |
| Table Center Height | 170mm | |
| Worktable Size | 450mm*297mm | |
| Spindle | Spindle Structure | High-rigidity Integral Spindle |
| Haozhi Built-in Motor Spindle | ||
| Spindle Nose Type | A2-6 (A2-8 optional) | |
| Spindle Bore | Φ66mm | |
| Max. Spindle Speed | 0-4500r/min | |
| Spindle Pulley Tooth Profile | 8YU, Pulley Ratio 1:2 | |
| Tailstock | Center Model | Morse Taper No.5 (Rotating Center) |
| Sleeve Diameter | Φ78mm | |
| Cylinder Working Pressure | 5-20KG | |
| Tailstock Travel | Hardened Way Slide 380mm | |
| Center Travel | 120mm | |
| Max. Distance from Chuck Jaw to Center | 550mm | |
| Travel | Max. X-axis Travel | 260mm (-25mm to +225mm) |
| Max. Z-axis Travel | 550mm | |
| Rapid Speed | X-axis Rapid Traverse | ≤18m/min |
| Z-axis Rapid Traverse | 18m/min | |
| X, Z, Y-axis Servo Motors | 11Nm | |
| Accuracy | X-axis Repeatability | ±0.003mm |
| Z-axis Repeatability | ±0.003mm | |
| Standard & Optional | External Sheet Metal Cover | Full Enclosure |
| Internal Sheet Metal Cover | Stainless Steel Full Protection | |
| Spindle Brake | HT500 - Four Piston | |
| Coolant Tank (Capacity) | Side-mounted Independent Tank 80L | |
| Y-axis Integrated Turret | BMT55-12-330, Y-axis Travel ±50mm, 8 Fixed Tool Holders (85mm Center Height) | |
| BMT45-15-364, Y-axis Travel ±50mm, 8 Fixed Tool Holders | ||
| Dimensions | Dimensions: Length 2380mm * Width 1600mm * Height 2050mm, Weight 4500KG | |
