The basic principle of equipment cleaning is that cleaning is the first process in equipment repair and is also an extremely important task. During the maintenance process of mechanical equipment, we may see some oil stains. If not cleaned in a timely manner, it can lead to machine malfunctions, affecting production progress and safety. What cleaning agent should we use for cleaning?

1、 How to clean heavy oil stains on the surface of machine tools?

1. According to the characteristics of the inspected workpiece, select the corresponding metal material cleaning agent for cleaning. If needed, please feel free to call and we will recommend suitable cleaning agents based on your needs.

2. Disassemble the required equipment according to the proportions listed in the manual before cleaning. However, for difficult to remove or stubborn oil stains, effective results cannot be achieved. It is recommended to use solvent based industrial cleaning agents for thorough cleaning.

3. Select the appropriate specialized equipment cleaning agent based on the material and paint type of the cleaned parts.

4. Regularly testing and adjusting the concentration and temperature of cleaning agents can improve the efficiency of equipment operation.

5. For example, when cleaning tools and equipment, it is necessary to wear protective equipment, gloves, goggles, etc

Check for leaks in all parts (including valve seals) and ensure that protective devices are intact and reliable; Check if there are any wiring terminals or loose objects at the power switch; Check if there are any leakage points in the electrical system and circuit control cabinet; Check whether the insulators of the electric motor are damp; Replace vulnerable attachments; Check if the coolant supply to the lubrication system is sufficient.

How to clean dirty machine tools

There are many cleaning methods for machine tools, such as rinsing with hot water.

If gasoline or diesel is used for cleaning, it depends on the situation. Because some workshops perform baking and painting work on certain workpieces. But the harm of doing so is relatively high, so professional equipment is needed to complete it. So, how to clean it for mechanical processing? Here is an introduction for everyone:

 Oil stains generated on machine tools

1.At this point, high-pressure air guns can be used to treat the oil stains on the components,

This method is suitable for various metal materials, and it is fast and effective, but it may cause serious corrosion. Therefore, it is recommended to choose water-based products.

We must replace the machine tool with a new one. How to clean heavy oil stains on the surface of machine tools, and what cleaning agents are used to clean mechanical equipment

2. The basic principle of equipment cleaning is that cleaning is the first process in equipment repair and is also an extremely important task

When performing maintenance and upkeep on mechanical equipment, it is necessary to follow the correct usage methods and safety standards. Correctly select cleaning agents to reduce damage and extend their lifespan.

Principles for cleaning equipment

1.Before cleaning, carefully inspect and confirm that all metal components and related parts are free of defects before carrying out cleaning operations.

Then inject it onto the surface of the cleaned item, wipe and rinse off any oil stains or residue on the parts, and apply a layer of Vaseline. After it is completely dry, apply the base coat.

2.Adopt corresponding cleaning processes according to different levels of pollution

For mild pollution, water-based cleaning agents can be used. For heavy pollution, choose a low foam cleaner with stable chemical properties, no phosphorus and sodium nitrite; For severe pollution, water-based cleaning agents can be used. 3： During the cleaning process, attention should be paid to the environmental temperature of the equipment and the temperature and humidity of the working medium, especially when the ambient temperature of the air conditioning system is high. Cleaning personnel should regularly pay attention to the ventilation of equipment to prevent equipment blockage or malfunction caused by overheating or humidity, maintain good workplace hygiene conditions, regularly clean equipment, and avoid affecting production progress.

How to clean dirty machine tools

Machine tools are one of the most frequently used tasks in machinery, so maintaining a good working environment is necessary to ensure machining quality and production efficiency. What aspects should be paid attention to during use?

Firstly, mechanical components such as cutting tools and parts should be cleaned; Secondly, before use, rinse thoroughly with clean water; Finally, if foreign objects or stains are found inside the device, you can brush off the old paint and then wipe it clean with a dry cloth.

Statement: This article is reproduced from the Internet for the purpose of transmitting more information, which does not mean that this website agrees with its views and is responsible for its authenticity. The content of the article is for reference only. If you need to contact this website due to content, copyright, or other issues, please send an email to contact us for deletion.